Laser Cut Texture Paper Pattern- for use with your Rolling Mill.

Barrie's Zoo - 5"x1" Strips - 5 Different animal Print patterns. Actual width of each pattern is slightly larger than 1" - 1.1-1.2" is more accurate. Cut these down to size, and away you ROLL! These will be cut apart to fit in shipping envelope!

This paper is good for ONE pass through the rolling mill and can be used with Sterling Silver, Copper, Aluminum, etc... You need to anneal and clean your metal first, and should be used with a piece of heavy paper, such as water colour paper to get the best imprint. These texture sheets work wonderfully with PMC, Metal Clay, or Polymer clay. They are reuseable for clay, so long as you don't get them wet!

All our patterns come with an instruction sheet on how to get the best results, and a test strip for practice!

If you do not own a Rolling mill and would like us to apply this texture to the metal for you that is no problem!
Please call us at 1-866-349-7464 or send us an email!

Please join our Facebook Group - https://www.facebook.com/lasertexturepaper

These texture sheets work wonderfully with PMC, Metal Clay, or Polymer clay. They are reuseable for clay, so long as you don't get them wet!
HAPPY 150th BIRTHDAY CANADA!!